Table of Contents
Advertisement
Subject (required)
Department
Organization
City
State
Postal Code
Country Code
Email
Domain Name
IP Address
Signature Algorithm
Key Length
The required
Subject
value contains important information about
the certificate. Contact the CA signing the certificate to determine
the content of the Subject parameter.
Optionally enter a value for your organizations's department name
if needing to differentiate the certificate from similar certificates
used in other departments within your organization.
Optionally enter the name of your organization for supporting
information for the certificate request.
Optionally enter the name of the City where the access point (using
the certificate) resides.
Optionally enter the name of the State where the access point
(using the certificate) resides.
Optionally enter the name of the Postal (Zip) Code where the
access point (using the certificate) resides.
Optionally enter the access point's Country Code.
Enter a organizational email address (avoid using a personal
address if possible) to associate the request with the proper
requesting organization.
Ensure the Domain name is the name of the CA Server. This value
must be set correctly to ensure the certificate is properly
generated.
Enter the IP address of this access point (as you are using the
access point's onbard Radius server).
Use the drop-down menu to select the signature algorithm used for
the certificate. Options include:
•
MD5-RSA - Message Digest 5 algorithm in combination with
RSA encryption.
•
SHA1-RSA - Secure Hash Algorithm 1 in combination with
RSA encryption.
Defines the length of the key. Possible values are 512, 1024, and
2048. Motorola recommends setting this value to 1024 to ensure
optimum functionality.
System Configuration
4-21
Advertisement
Table of Contents
