Table of Contents
Advertisement
10-16
AP-51xx Access Point Product Reference Guide
10.4.2 Switch Configuration
Both a WS5100 (running firmware version 3.1 or later) or a RFS7000 (running firmware version 1.1 or
later) require an explicit adaptive configuration to adopt an access point (if IPSec is not being used
for adoption). The same licenses currently used for AP300 adoption can be used for an AAP.
Disable the switch's
requiring adoption, or leave as default. In default mode, any AAP adoption request is honored until
the current switch license limit is reached.
To disable automatic adoption on the switch:
1. Select
Network
2. Select the
Settings
3. Ensure the
When disabled, there is no automatic adoption of non-configured radios on the network.
Additionally, default radio settings will NOT be applied to access ports when automatically
adopted.
NOTE For IPSec deployments, refer to
Any WLAN configured on the switch becomes an extended WLAN by default for an AAP.
4. Select
Network
Adopt unconfigured radios automatically
>
Access Port Radios
Configuration
tab (should be displayed be default) and click the
button.
Adopt unconfigured radios automatically
IPSec and Independent WLAN on page 10-20
commands in red and associated comments in green.
>
Wireless LANs
option and manually add AAPs
from the switch main menu tree.
option is NOT selected.
Sample Switch Configuration File for
from the switch main menu tree.
Global
and take note of the CLI
Advertisement
Table of Contents
