Table of Contents
Advertisement
AP51xx>admin(network.wireless.qos.edit)>
Descripton:
Edits the properties of an existing QoS policy.
Syntax:
show
set
qos-name
<index>
vop
<index>
mcast
<mac>
wmm-qos
<index>
param-set
<set-name>
cwmin
<access
category>
cwmax
<access
category>
aifsn
<access
category>
txops
<access
category>
default
change
..
For information on configuring the WLAN QoS options available to the access point using the applet (GUI), see
Quality of Service (QoS) Policy on page
Displays QoS policy parameters.
Sets the QoS name for the specified index entry.
Enables or disables support (by index) for legacy VOIP devices.
Defines primary and secondary Multicast MAC address.
Enables or disables the QoS policy index specified.
Defines the data type used with the qos policy and mesh
network. When set to a value other then manual, editing the
access category values is not necessary. Options include; 11g-
default, 11b-default, 11g-wifi, 11b-wifi, 11g-voice, 11b-voice or
manual for advanced users).
<index>
Defines Minimum Contention Window (CW-Min) for specified
access categoiry and index.
<index>
Defines Maximum Contention Window (CW-Max) for specified
access categoiry and index.
<index>
Sets Arbitrary Inter-Frame Space Number (AIFSN) for specified
access categoiry and index.
<index>
Configures Opportunity to Transmit Time (TXOPs Time) for
specified access categoiry and index.
<index>
Defines CWMIN, CWMAX, AIFSN and TXOPs default values.
Completes the policy edit and exits the session.
Cancels the changes and exits.
5-39.
8-113
Setting the WLAN
Advertisement
Table of Contents
