Table of Contents
Advertisement
AP51xx>admin(network.lan.dhcp)> set
Description:
Sets DHCP parameters for the LAN port.
Syntax:
set range
<LAN-idx> <ip1>
lease
<LAN-idx> <lease>
Example:
admin(network.lan.dhcp)>set range 1 192.168.0.100 192.168.0.254
admin(network.lan.dhcp)>set lease 1 86400
admin(network.lan.dhcp)>show
**LAN1 DHCP Information**
DHCP Address Assignment Range:
Starting IP Address
Ending IP Address
Lease Time
For information on configuring DHCP using the applet (GUI), see
<ip2>
Sets the DHCP assignment range from IP address <ip1> to IP address <ip2> for the
specified LAN.
Sets the DHCP lease time <lease> in seconds (1-999999) for the specified LAN.
: 192.168.0.100
: 192.168.0.254
: 86400
Configuring the LAN Interface on page
5-1.
8-31
Advertisement
Table of Contents
