Table of Contents
Advertisement
•
Question 3: Can the AP be accessed via its LAN interface of AP#1 from the local
subnet of AP#2 and vice versa?
Yes.
•
Question 4: Will the default "Manual Key Exchange" settings work without making
any changes?
No. Changes need to be made. Enter Inbound and Outbound ESP Encryption keys on both
APs. Each one should be of 16 Hex characters (depending on the encryption or
authentication scheme used). The VPN tunnel can be established only when these
corresponding keys match. Ensure the Inbound/Outbound SPI and ESP Authentication Keys
have been properly specified.
•
Question 5: Can a tunnel between an AP-5131 and WS2000 be established?
Yes.
•
Question 6: Can an IPSec tunnel over a PPPoE connection be established - such as
a PPPoE enabled DSL link?
Yes. The access point supports tunneling when using a PPPoE username and password.
•
Question 7: Can I setup an access point so clients can access both the WAN
normally and only use the VPN when talking to specific networks?
Usage Scenarios
B-15
Advertisement
Table of Contents
