Table of Contents
Advertisement
10-4
AP-51xx Access Point Product Reference Guide
10.1.4 Licensing
An AAP uses the same licensing scheme as a thin access port. This implies an existing license
purchased with a switch can be used for an AAP deployment. Regardless of how many AP300
and/or AAPs are deployed, you must ensure the license used by the switch supports the number of
radio ports (both AP300s and AAPs) you intend to adopt.
10.1.5 Switch Discovery
For an AP-51XX to function as an AAP (regardless of mode), it needs to connect to a switch to receive
its configuration. There are two methods of switch discovery:
•
Auto Discovery using DHCP
•
Manual Adoption
NOTE To support switch discovery, a WS5100 model switch must be running
10.1.5.1 Auto Discovery using DHCP
Extended Global Options 189, 190, 191, 192 can be used or Embedded Option 43 - Vendor Specific
options can be embedded in Option 43 using the vendor class identifier: MotorolaAP.51xx-V2-0-0.
(separate by comma, semi-colon, or space delimited)
AP-51XX Encryption IPSec Passphrase (Hashed) **
Configurationv
firmware version 3.1 or higher, whereas a RFS7000 model switch must be
running firmware version 1.1 or higher. The access point must running
firmware version 2.0 or higher.
List of Switch IP addresses
Switch FQDN
AP-51XX switch discovery mode
1 = auto discovery enable
2 = auto discover enabled (using IPSec)
Code
Data Type
188
String
190
String
191
String
192
String
Advertisement
Table of Contents
