Table of Contents
Advertisement
5-58
AP-51xx Access Point Product Reference Guide
802.11 b/g mode
Set Rates
Specify
b
only,
g only
or
g radio transmits in the 2.4 Ghz band exclusively for 802.11b
(legacy) clients or transmits in the 2.4 Ghz band for 802.11g clients.
Selecting b and g enables the access point to transmit to both b and
g clients if legacy clients (802.11b) partially comprise the network.
Select accordingly based on the MU requirements of the network.
This parameter does not apply to access point 802.11a radios.
Click the
Set Rates
button to display a window for selecting
minimum and maximum data transmit rates for the radio. At least
one
Basic Rate
must be selected as a minimum transmit rate
value.
Supported Rates
if a higher selected data rate cannot be maintained. Click
implement the selected rates and return to the 802.11a or
802.11b/g radio configuration screen.
Clicking
Cancel
reverts the Set Rates screen to the last saved
configuration. Motorola recommends using the default rates
unless qualified to understand the performance risks of changing
them. The appearance of the Set Rates screen varies depending on
the 802.11a or 802.11b/g used, as the dates rates available to the
two radios are different.
b and g
to define whether the 802.11b/
define the data rate the radio defaults to
OK
to
Advertisement
Table of Contents
