Table of Contents
Advertisement
3-11
3. Basic Functions
Manual Bypass Copying
• Use the Manual Bypass to make copies on paper not loaded in any tray, or to copy onto OHP
transparencies or any other special paper.
• The setting of copy paper sizes is needed for manual bypass copying.
• Manual Bypass cannot be used for a reserved job.
Copy Paper that Can be Used for Manual Bypass
Types of Paper
• Plain paper
Thin Paper (20 lbs.), CF Paper (20 lbs. to 24 lbs.)
• Thick paper
Heavy Stock 1 (24 lbs. to 28 lbs.), Heavy Stock 2 (50 lbs. to 60 lbs. cover)
• OHP Transparencies (recommended brand)
Paper Size
• 11" 17"L to LetterC and 12" 18"
• Postcard
• Max. Size: 11-3/4"
• Minimum Size: 5-3/4" 7-1/4"
Capacity of the Manual Bypass Tray
• Plain paper, Heavy Stock 1 ... Up to 50 sheets
• Plain paper (once-copied paper) ... Up to 20 sheets
• Heavy Stock 2, OHP transparencies ... Up to 20 sheets.
Using the Manual Bypass Tray
Place the original on the Original Glass.
1
Swing down the Manual Bypass Tray.
2
Insert a neat stack of copy paper into the
3
Manual Bypass Tray until it stops and slide
the Paper Guide Plates to the size of the copy
paper.
"
NOTES
• Load the OHP transparencies so that the front
1144O012AA
• Use only the recommended OHP
• Only CF Paper can be used for 2-sided copies.
• When inserting paper with one side previously
• Make sure that the top level of the original
1144O013AA
side (on which the white tape is fitted) faces up
in the direction as shown.
transparencies.
printed, load the paper stack so that the blank
side faces down.
stack does not exceed the
1144O014AA
marking.
Advertisement
Table of Contents
