Minolta CF910 Operator's Manual page 83

3-5
2. Placing Originals
Using the Duplexing Document Feeder
The Duplexing Document Feeder automatically feeds original sheets placed on the Document Feed Tray
one by one. After the copy cycle has been completed, it automatically ejects the original onto the
Document Exit Tray.
Some originals may not be suitable for reliable operation of the Duplexing Document Feeder. Here is a
guideline.
Originals Suitable for the Duplexing Document Feeder
Type of Originals: Sheets (Plain paper)
Normal mode
•1-Sided Original (weighing 13-1/4 lbs. to 29-1/4 lbs.)
•2-Sided Original (weighing 16 lbs. to 24 lbs.)
•Mixed Original Detection mode (weighing 16 lbs. to 24 lbs.)
Original Size: 1-Sided Original, 2-Sided Original Mode : 11" 17"L to InvoiceL
2-in-1 (Dual Original Scanning) mode
Mixed Original Detection mode
Originals Not Suitable
• Typing paper, paraffin paper, and other thin paper
• Thick paper
• Originals greater than 11" 17"L or smaller than InvoiceL
• Transparencies, translucent paper
• Wrinkled, dog-eared, curled, or torn originals
• Clipped or stapled originals
• Carbon-backed originals
Typing paper, Typing paper,
paraffin paper, paraffin paper,
and other thin and other thin
paper paper
Thick paper Thick paper
NOTE
For any of these types of originals, raise the Duplexing Document Feeder and place the original
manually on the Glass to make a copy.
: LetterC
: 11" 17"L to Letter
Continuous
forms
Wrinkled or
dog-eared
original
p. 3-3
Stapled
originals
1134O073AA