Table of Contents
Advertisement
62
2. Basic Job Setting
Manual Bypass Copying
Use the manual bypass copying capability of the copier when you want to make
copies on paper not loaded in any Drawer, or on transparencies, translucent paper,
or any other special paper.
If the copier is equipped with a Multi Bypass Table (option), you can load more
than one sheet of such paper to make a continuous run.
You can also use the Cover Mode capability if the Multi Bypass Table is used
with Automatic/Duplexing Document Feeder AF-3/AFR-7 (option).
Types of Paper
Plain paper (weighing 60 to 90 g/m
Heavyweight paper (weighing 90 to 157 g/m
Transparencies, translucent paper
Paper Size
Width: 100 to 297 mm
Length: 140 to 432 mm
Capacity
Plain paper, heavyweight paper, transparencies, translucent paper ... 1 sheet at a time
<Multi Bypass Table>
Plain paper ... Approx. 50 sheets
Heavyweight paper, transparencies, translucent paper ... Approx. 20 sheets
Using the Manual Bypass Table
NOTES
Insert the copy paper one sheet at a time.
Do not insert a sheet of paper while the copier is warming up or in a
multi-copy cycle.
The Auto Paper Mode, Auto Size Mode, Book copying, any of the Finishing
modes, 2-sided copying, Margin Mode, or Cover Mode cannot be selected for
manual bypass copying.
2
)
2
)
1
Place the original on the Original
Glass and make the control panel
settings.
2
Insert the copy paper into the
copier.
This automatically starts the
copy cycle.
1139O0150A
Advertisement
Table of Contents
