Table of Contents
Advertisement
6-19
7. What Does Each Message Mean?
Message
The orig. is left on the glass,
remove it before proceeding.
Max. # of sets for sorting is 10.
Max. # for 2-sided copies is 1.
Original size cannot be detected. Original is not placed in the
Matching size is not available.
Place original on Original Glass. The current control panel settings
Cause
You try to use the Duplexing
Document Feeder when there is
an original left on the Original
Glass.
You have entered 11 or more for
the number of copies to be made
in a sort/sort and staple mode.
You have entered 2 or more for
the number of copies to be made
in a 2-sided copy mode.
correct position.
A non-standard size original is
used.
No Trays contain paper of the
right size to run a copy cycle in
the Auto Paper Mode.
defy the use of the Duplexing
Document Feeder.
Action
First remove the original from the
Glass, then load the originals in
the Duplexing Document Feeder.
Reenter 10 or less for the number
of copies to be made.
Reenter 1 for the number of
copies to be made.
Place the original correctly.
p. 3-3
Cancel the Auto Paper Mode and
select the appropriate copy paper
size.
p. 3-9
Cancel the Auto Paper Mode and
select the appropriate copy paper
size or make copies using the
Manual Bypass Tray.
Remove the originals from the
Duplexing Document Feeder and
place them, one by one, on the
Original Glass. Or, cancel the cur-
rent panel settings.
Advertisement
Table of Contents
