What Does Each Message Mean - Minolta CF910 Operator's Manual

7. What Does Each Message Mean?

What Does Each Message Mean?
Message
Please call tech. service.
code: XXXXX
Input your 4-digit Access Code
Number, and press OK.
Please insert the Key Counter.
Load paper in the XXXXX Tray. The currently selected Tray has
Please add XXXX Toner.
Follow the label inside the front
door.
The Staple Cartridge is empty.
Please replace with a new one.
Misfeeding is detected. Please
remove paper at .
The section indicated by
open. Please close it properly.
The Fuser Oil has run out.
Please call your technical rep.
The Fuser Oil has run out. Please
replenish.
Toner Collecting Bottle is nearly
full.
Please call your tech. rep.
Copies remain in the Duplex
Unit.
Press START to feed them out.
Sorter has reached its capacity.
Please remove all copies from
bins first.
Cause
The copier malfunctioned and is
unable to make copies.
An access number has been set
and the number assigned for your
own department must be entered
before you can make a copy.
The Key Counter is not plugged
in and the copier is unable to
make copies.
run out of paper.
Toner has run out and the copier
is unable to make copies.
Toner is soon running out.
The staples have run out.
A misfeed has occurred and no
copy cycle can be initiated.
is A copier door is left open or an
option is not attached properly
and the copier is unable to make
copies.
The Fuser Oil needs to be
replenished.
The Fuser Oil has run out and the
copier is unable to make copies.
The Toner Collecting Bottle is
full and the copier is unable to
make copies.
A copy or copies are left in the
Duplex Unit and the copier is
unable to make copies.
Sorter has reached its capacity.
Remove all copies from the bins
first.
Action
Call and inform your Technical
Representative of the code being
shown on the Touch Panel.
Enter the 4-digit access number.
("Access Number" p. 2-11)
Plug in the Key Counter.
Load the Tray with paper.
p. 6-1
Replenish toner. p. 6-3
Replace the Staple Cartridge with
a new one. p. 6-5
Clear the misfed sheet of paper.
p. 6-7
Close the door or cover and attach
the option properly.
Please call your technical
representative.
Please Replenish the Fuser Oil.
p. 6-15
Please call your technical
representative.
Press the Start Key to remove all
copies from the Duplex Unit.
Remove all copies from the Sorter
Bins.
6-18