Table of Contents
Advertisement
Touch
X
and enter the length of the original
3
from the 10-Key Pad. Then, touch
enter the width of the original.
(To correct a value entered, press the Clear
Key.)
Touch
Width
and enter the frame erase
4
width from the 10-Key Pad.
Touch
OK
.
5
Useful Tips
• Touch
(cancel) to cancel the settings made
C
for, and exit from, Frame Erase.
• This copier has been designed to have a lost
image of a width of 8 mm on the leading edge,
4 mm on the trailing edge, and 3 mm each on
the front and rear edges in the full size mode.
Set a frame erase "Width" wider than each of
these values to have a frame erase effect at all.
• A shadow can at times be produced along the
edges when you make an 12" 18" copy from
an 11" 17" original. We recommend that
Frame Erase be used in such cases.
1. Using the Applied Input
<When the original is standard size>
Y
and
Touch
1
Select the applicable "Original Size."
2
Touch the exact size key or
1154P291EA
Enter the frame erase "Width" from the 10-
3
key Pad.
1154P292EA
Touch
4
Useful Tips
• Touch
for, and exit from, Frame Erase.
• This copier has been designed to have a lost
image of a width of 8 mm on the leading edge,
4 mm on the trailing edge, and 3 mm each on
the front and rear edges in the full size mode.
Set a frame erase "Width" wider than each of
these values to have a frame erase effect at all.
• A shadow can at times be produced along the
edges when you make an 12" 18" copy from
an 11" 17" original. We recommend that
Frame Erase be used in such cases.
Output Functions
.
Frame Erase
1154P140CA
Auto Detect
.
OK
C
(cancel) to cancel the settings made
4-2
.
1154P289EA
1154P290EA
Advertisement
Table of Contents
