Table of Contents
Advertisement
Instructions for Loading Originals
Use the following procedure for loading originals to make 1-sided copies from 2-sided originals.
Procedure
Load the originals crosswise.
If the originals are loaded lengthwise, the directions of the copy images will be mixed up.
Correct:
2-Sided Originals
Loaded Crosswise
Precautions for Book Copying
• Place the open book so that its top edge is at the rear of the copier and the center of the book is aligned
with the Book Marker indicated on the Original Length Scale.
• Make copies in descending order of page.
• Select the desired zoom ratio and copy paper size.
Placing the Book on the Glass Correctly
Precautions for 2-in-1 Copying
When the 2-in-1 mode is selected, the copier automatically selects a reduced zoom ratio. However, you
can choose another zoom ratio by changing the User's Choice setting.
Incorrect:
1-Sided Copies
2-Sided Originals
Loaded Lengthwise
1151O023AA
Original Length Scale
1155O027AA
4. Input
Output Mode
1-Sided Copies
1151O022AB
Book Marker
1154O003AA
p. 5-15
3-24
Advertisement
Table of Contents
