Table of Contents
Advertisement
40
2. Copying Procedure
Manual Bypass Copying
Use the Manual Bypass to make copies on paper not loaded in the Drawer, or to
copy onto transparencies, translucent paper, or any other special paper.
If the copier is equipped with a Multi Bypass Tray (option), you can load more
than one sheet of paper for a continuous run.
Types of Paper
Plain paper (weighing 60 g/m
Heavyweight paper (weighing 90 g/m
Transparencies, translucent paper
Paper Size
Width: 100 mm to 297 mm
Length: 140 mm to 432 mm
Capacity
Plain paper, heavyweight paper, transparencies, translucent paper ... 1 sheet at a time
<Multi Bypass Tray>
Plain paper: Approx. 50 sheets
Plain paper (once-copied paper) ... Up to 20 sheets.
Heavyweight paper, transparencies, translucent paper: Approx. 20 sheets
IMPORTANT
When making multiple copies using OHP transparencies, set the Copy Tray
into the upper position if there is no Sorter or Staple Sorter mounted.
Using the Manual Bypass Tray
NOTES
Insert the copy paper one sheet at a time.
Do not insert a sheet of paper while the copier is warming up or in a
multi-copy cycle.
The Book Copying Mode cannot be selected for manual bypass copying.
2
2
to 90 g/m
)
2
2
to 157 g/m
)
1
Place the original on the Original
Glass and make the control panel
settings.
2
Insert the copy paper into the
Manual Bypass Tray.
This automatically starts the
copy cycle.
1139O0150A
Hide quick links:
Advertisement
Table of Contents
