Settings Required To Use Scan To Folder Function - Ricoh PRO 1106EX Operating Instructions Manual

Connecting the Machine

Settings Required to Use Scan to Folder Function

This section describes necessary set items for sending file.
1
Ethernet
This section describes necessary set items for sending file with ethernet cable.
For details about specifying the settings, see "Interface Settings" and "File Transfer".
Heading
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
File Transfer
File Transfer
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
Reference
p.52 "Interface Settings"
p.62 "File Transfer"
22
Setting Item
Machine IPv4 Address
IPv4 Gateway Address
DNS Configuration
DDNS Configuration
Domain Name
WINS Configuration
Effective Protocol
Ethernet Speed
LAN Type
Permit SNMPv3 Communication
Permit SSL/TLS Communication
Host Name
Scanner Resend Interval Time
Number of Scanner Resends
Setting Requirements
Mandatory
Mandatory
As required
As required
As required
As required
Mandatory
As required
Mandatory
As required
As required
As required
As required
As required