Ricoh PRO 1106EX Operating Instructions Manual page 210

Registering Addresses and Users for Scanner Functions
R
Press [Exit].
Note
❒ To register the name, see Registering Names".
❒ You can enter a path using up to 128 characters.
❒ To specify a folder, you can either enter the path manually or locate the
folder by browsing the network.
❒ If the connection test fails, check the settings, and then try again.
❒ When Do not Specify is selected, the SMB User Name and SMB Password
that you have specified in Default User Name / Password (Send) of File
Transfer settings applies.
❒ If User Authentication is specified, contact your administrator.
Reference
p.184 "Registering Names"
p.202 "To locate the folder manually"
p.203 "Using Browse Network to locate the folder"
To locate the folder manually
A
Press [Change] under Path.
7
B
Enter the path where the folder is located.
C
Press [OK].
If the format of the entered path is not correct, a message appears. Press [Exit],
and then enter the path again.
Note
❒ Enter the path using the format as follows : "\\ServerName\ShareName\Path-
Name"
❒ You can also enter an IPv4 address.
❒ You can enter a path using up to 128 characters.
202