Ricoh PRO 1106EX Operating Instructions Manual page 32

Connecting the Machine
IEEE 802.11b (wireless LAN)
This section describes necessary set items for sending file with IEEE 802.11b
(wireless LAN).
1
For details about specifying the settings, see "Interface Settings" and "File Transfer".
Heading
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/
IEEE 802.11b
interface settings/
IEEE 802.11b
interface settings
/IEEE 802.11b
interface settings/
IEEE 802.11b
interface settings/
IEEE 802.11b
File Transfer
File Transfer
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. If both ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface takes precedence.
Reference
p.52 "Interface Settings"
p.62 "File Transfer"
24
Setting Item
Machine IPv4 Address
IPv4 Gateway Address
DNS Configuration
DDNS Configuration
Domain Name
WINS Configuration
Effective Protocol
LAN Type
Permit SNMPv3 Communication
Permit SSL/TLS Communication
Host Name
Communication Mode
SSID Setting
Channel
Security Method
Transmission Speed
Scanner Resend Interval Time
Number of Scanner Resends
Setting Requirements
Mandatory
Mandatory
As required
As required
As required
As required
Mandatory
Mandatory
As required
As required
As required
Mandatory
As required
As required
As required
As required
As required
As required