To change the protocol
A
Press [FTP] or [NCP].
B
A confirmation message appears. Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
C
Enter each items again.
Reference
p.207 "Registering a Folder"
Changing SMB settings
To change SMB settings:
A
Press [Change] of path name.
B
Enter the name of the path on which the folder is located, and then press
[OK].
Note
❒ The folder destination can be selected using Network Reference.
Reference
p.203 "Using Browse Network to locate the folder"
Registering Folders
205
7