Ricoh PRO 1106EX Operating Instructions Manual page 22

Connecting the Machine
❖ When using in ad-hoc mode / 802.11 ad-hoc mode
1
1.
If the IEEE 802.11b interface unit is working, it is lit in orange.
2.
If it is connected properly to the network, the LED is green when in ad-hoc
mode or 802.11 ad-hoc mode. If the LED is blinking, the machine is searching
for devices. The LED will light after a few seconds.
Print the configuration page to verify settings.
Note
❒ For more information about printing a configuration page, see "Print List".
Reference
p.158 "Printing the configuration page"
Checking the Signal
When using in infrastructure mode, you can check the machine's radio wave sta-
tus using the control panel.
A Press [System Settings].
B
Press [Interface Settings].
C Press [IEEE 802.11b].
D Press [Wireless LAN Signal].
The machine's radio wave status appears.
E
After checking radio wave status, press [Exit].
Press the {User Tools} key to return to the User Tools menu.
F
Note
❒ To check the radio wave status, press [IEEE 802.11b] under [LAN Type] on the
[Network] screen.
14
1
2
ZGDH600J