Settings Required To Use E-Mail Function - Ricoh PRO 1106EX Operating Instructions Manual

Connecting the Machine
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are
1
connected, the selected interface takes precedence.
Reference
p.52 "Interface Settings"
p.62 "File Transfer"

Settings Required to Use E-mail Function

This section describes necessary set items for sending e-mail.
Ethernet
This section describes necessary set items for sending e-mail with Ethernet cable.
For details about specifying the settings, see "Interface Settings" and "File Transfer".
Heading
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
18
Setting Item
Machine IPv4 Address
IPv4 Gateway Address
DNS Configuration
DDNS Configuration
Domain Name
WINS Configuration
Effective Protocol
Ethernet Speed
LAN Type
Permit SNMPv3 Communication
Permit SNMPv3 Communication
Host Name
SMTP Server
SMTP Authentication
POP before SMTP
Reception Protocol
POP3/IMAP4 Settings
Administrator's E-mail Address
E-mail Communication Port
Program/Change/
Delete E-mail Message
Setting Requirements
Mandatory
Mandatory
As required
As required
As required
As required
Mandatory
As required
Mandatory
As required
As required
As required
Mandatory
As required
As required
As required
As required
As required
As required
As required