Preparation For A New Notebook - EUROCOM 5100-S DeskNote Lite User Manual

User's Manual

Preparation for a New Notebook

1) Use a bootable floppy disk to start the system.
2) Run the FDISK utility from DOS to create a bootable
partition. (See DOS manual for the operation details.)
3) Format the hard disk.
Follow the command "Format C: /S"
to create a bootable hard disk and make the boot system
files.
(C:/S copies system files to the formatted disk)
4) Copy the file "MSCDEX.exe" from the floppy disk to
drive C.
5) Insert the CD-ROM/DVD-ROM driver disk.
Type "A: Install".
6) Restart the system.
Note 1: Using another computer you can copy the CD-ROM/DVD-
ROM driver from the CD-ROM disk on to a floppy disk.
Note 2: If the supplied CD-ROM/DVD-ROM driver does not offer an
install program, you can copy the driver to drive C, and then
configure the Config.sys and Autoexec.bat files.
6-2