Table of Contents
Advertisement
User's Manual
Installing Drivers in Windows NT4.0
Note 1: After installing Windows NT4.0, please install the
latest Service Pack to enhance the function. Download the
latest Service Pack version from the Microsoft web site.
Note 2: Before installing the following drivers, press
"Ctrl+Alt+S" to enter the SCU when the computer boots. In the
Startup Menu, deselect "Enable PNP OS Support" and choose
"Save and Exit" in the Exit Menu
Step 1: Installing the VGA Driver
1) Click Start.
2) Select Control Panel.
3) Double Click on Display
4) Select the Settings Tab
5) Choose Display Type
6) Choose Change
7) Select Have Disk
8) Open the path to E:\WINNT40
9) Click OK
10) Click OK
11) Select YES when you see "You are about to install a
third-party driver"
12) Click OK
13) Close the Display Properties Window
14) Select Yes to restart you computer
6-14
Advertisement
Table of Contents
Need help?
Do you have a question about the 5100-S DeskNote Lite and is the answer not in the manual?
Questions and answers