Printer Initialization; Dimension - Epson Stylus PHOTO 1270 Service Manual

EPSON Stylus PHOTO 870/1270

1.4.7 Printer Initialization

There are three kinds of initialization methods as explained below:
1. Power on initialization
It performs the following when the printer is turned on or the printer
recognizes the cold reset command (remote RS command):
(a) Initializes printer mechanism.
(b) Clears input data buffer.
(c) Clears print buffer.
(d) Sets default values.
2. Panel initialization
Performed if the printer is turned off and back on within 10 seconds or
/INIT signal is input. It performs the following:
(a) Cap the printer head.
(b) Eject a paper.
(c) Clears input data buffer.
(d) Clears print buffer.
(e) Sets default values.
3. Software initialization
The ESC@ command also initializes the printer. It performs the
following:
(a) Clears print buffer.
(b) Sets default values.
PRODUCT DESCRIPTIONS

1.5 Dimension

EXTERNAL DIMENSION
Stylus PHOTO 870:
Stylus PHOTO 1270:
WEIGHT
Stylus PHOTO 870:
Stylus PHOTO 1270:
Dimension
470 (W) x 285 (D) x 175 (H)
599 (W) x 285 (D) x 180 mm (H)
5.6 kg
8.0 kg
Revision B
31