EPSON Stylus Photo 870/1270
8. Remove the tension spring (0.618) attached to the LEVER, DE, LOCK
and DE Unit.
TENSION SPRING, 0.618
Figure 4-25. TENSION SPRING, 0.618 Removal
Disassembly And Assembly
LEVER, DE, LOCK
Disassembly Procedures
9. Release the hook in the DE Unit (BRACKET, MOTOR, ASF) securing
LEVER, DE, LOCK. Then push the lever out to the right to release it
from the installation hole in the DE Unit and remove it.
LEVER, DE, LOCK
Figure 4-26. LEVER, DE, LOCK Removal
When removing LEVER, DE, LOCK, be careful not to break
C A U T I O N
the hook in the DE Unit.
Revision B
Locking position
LEVER, DE, LOCK
95