Epson Stylus PHOTO 1270 Service Manual page 142

EPSON Stylus Photo 870/1270
Table 6-2. Lubrication Point (continued)
Lubrication Point
17 The COMBINATION GEAR 13.5, 30
shaft in FRAME, LEFT
18 The LD roller assembly hole in the
FRAME, ASF; B
• Using a brush, apply the grease
evenly to the entire inside surface of
the hole.
19 The left and right latches in the
Hopper assembly along which the
hopper release levers turn.
• Use a brush to apply the grease.
20 GUIDE PLATE, CR
!
Never apply oil directly to the CR guide shaft. This may
W A R N I N G
cause fatal damage to the main components of the
printer.
!
Avoid applying too much oil to the oil pad. Otherwise, you
may critically damage the main components of the
printer.
MAINTENANCE
Lubricant Type &
Refer to:
Amount
G-26 Page 144
φ
1 x 5mm
G-26 Page 145
φ
1 x 1mm
G-26 Page 145
A 2-mm wide bead for
each
G-26 Page 145
φ
1 (See the figure for
length.)
Overview
G-26
Lubrication Point No.1
HOLDER, PULLEY, DRIVEN
G-26
Lubrication Point No.2
Revision B
G-26
G-26
G-26
142