Epson Stylus PHOTO 1270 Service Manual page 102

EPSON Stylus Photo 870/1270
!
While assembling the ASF Unit, be careful not to smear
C H E C K
any parts with oil on the cam parts. If oil gets other
P O I N T
parts, it should be wiped off.
!
When installing LEVER, HOPPER, RELEASE, set it in the
correct direction. (See Figure 4-39.)
!
Be sure to attach the following parts to SHAFT, ROLLER,
LD securely. (See Figure 4-38.)
- BUSHING, FIXING, SHAFT, LEFT (white plastic part)
- WHEEL, DETECTOR (black plastic part)
!
When installing the LD Roller Assemblies to SHAFT,
ROLLER, LD, make sure the black one (right LD Roller
Assembly) goes to the right.
!
When setting the right and left LD Roller Assemblies,
align their grooves with the rail rib in FRAME, ASF; B.
(See Figure 4-40.)
Disassembly And Assembly
Figure 4-39. LEVER, HOPPER, RELEASE Installation
Figure 4-40. LD Roller Assembly Installation (1)
Disassembly Procedures
LEVER, HOPPER, RELEASE
Groove in the LD Roller
Assembly
Rail Rib in FRAME, ASF; B
Revision B
102