Epson STYLUS COLOR 580 Service Manual page 110

EPSON Stylus COLOR 580
3. After complete the Head voltage ID input, the following screen is displayed.
Figure 5-23. Initial ink charge function
4. For the next step, select the "Initial ink charge" in the above menu. Following
message is displayed. Install the band-new I/C to the printer by following the
message.
Figure 5-24. Confirmation message for brand-new I/C installation
5. After install the brand-new I/C, click the "OK" button to perform the Initial ink
charge in order to fill out the printhead cavity with the ink.
In this sequence, about 1/2 ink of the brand-new black I/C and 1/6 ink of the
brand-new color I/C are consumed. And it takes about 110 seconds.
If you click the "No" button, the program proceed the I/C exchange sequence.
Adjustment
6. After complete the Initial ink charge, following message is displayed.
7. Click the "Nozzle check" in the above menu to check the nozzle condition. After
print the nozzle check pattern, following message is displayed.
8. If any segment in the nozzle check pattern is missing, click the "Yes" button to
perform the powerful cleaning. If all segment is printed correctly, click the "No"
button to proceed the Bi-directional adjustment function.
Sequential Repair Service Program feature
Figure 5-25. Nozzle check pattern function
Figure 5-26. Confirmation message for nozzle condition
Revision A
110