Printhead Replacement - Epson STYLUS COLOR 580 Service Manual

EPSON Stylus COLOR 580

5.2.3 Printhead replacement

When you replace the printhead with new one, this repair item should be selected in the
Sequential repair service program.
1. Replace the Printhead with the new one and select the "Printhead replacement"
item in the Sequential repair service program menu. Following "Printhead
replacement" menu is displayed.
Figure 5-19. Printhead replacement program menu
2. Click the "Head voltage ID Input" in the above menu. The screen below appears
Input the 6digits code by referring the head ID label stacked on the Printhead and
click the "OK" button.
Figure 5-20. Head voltage input menu
Adjustment
NOTE: If you input the incorrect digits code for the Head voltage ID menu,
following error message is displayed.
Figure 5-21. Error message for incorrect Head voltage input (1)
Figure 5-22. Error message for incorrect Head voltage input (2)
Sequential Repair Service Program feature
Revision A
109