Epson STYLUS COLOR 580 Service Manual page 53

EPSON Stylus COLOR 580
Table 3-5. Error indication
Condition Status Monitor 3 Indication
• Head cleaning
can not be
completed.
Figure 3-6. Head cleaning caution
• Head alignment
(bi-d) was not
performed.
Figure 3-7. Print head alignment was
not performed
NOTE: This error message is NOT
indicated on Stylus COLOR 580.
Even if the Bi-d Adjustment is not
done, Printer driver ignore the
status.
Troubleshooting
Generic
Condition
Remedy
• Communication
Click "Yes"
Error
button and
replace the
I/C by
following the
procedure.
Use the Print
head alignment
utility on the
• General Error
printer driver
utility menu to
align the print
head.
Overview
Table 3-6. Error indication
Status Monitor 3 Indication
Figure 3-8. Communication error
Figure 3-9. General error
Revision A
Generic
Remedy
1) Check the
correct printer
driver is
selected in the
printer setting.
2) Check the
USB I/F cable
is connected
correctly.
3) Disconnect
the AC cable
and connect it
again.
Motors or
circuit boards
may be broken.
Find out the
failure parts by
referring to the
"Unit level
troubleshootin
g".
53