Epson STYLUS COLOR 580 Service Manual page 98

EPSON Stylus COLOR 580
.
n
When you replace the ASF frame or Hopper with the new one,
make sure to lubricate the specific amount of G26 into the groove
on ASF frame. Refer to Figure 6-7 & Figure6-9 in the Chapter 6.
n
Fasten the ASF unit C.B.S. TITE (P4) 3x6,F/Zn screw (left screw
in the following figure), Plain washer 3.2x1x7,F/Zn & C.B.S
3x6,F/Zn screw (right screw in the following figure) in the order
of following figure.
1
Figure 4-61. ASF fixing screws fastening order
n
Tightening torque for screw
• C.B.S. 3x6 F/Zn screw for ASF
(right screw in above figure)
• C.B.S. TITE(P4) 3x6, F/Zn screw for ASF: 9+/-1kgf.cm
(left screw in above figure)
Disassembly and Assembly
2
: 9+/-1 kgf.cm
Disassembly
Revision A
98