Epson STYLUS COLOR 580 Service Manual page 83

EPSON Stylus COLOR 580
n
Do not damage the tooth of the Spur gear 35.2 and the
Combination gear 11.2, 35.2 when assembling the LD roller shaft
holder unit.
Spur gear 35.2
Combination gear 11.2, 35.2
Combination Gear 11.2, 35.2 and Spur Gear 35.2
Disassembly and Assembly
Figure 4-25.
n
Before assembling the LD roller shaft, make sure that the round
hole of the Clutch is set on the protrusion on the LD roller shaft
as shown in the following figure.
n
Assemble the LD roller shaft holder unit to the printer
mechanism in the following procedure.
1) Set the tip of the Change lever to the printer front side.
Figure 4-27. LD Roller shaft holder assembling
Disassembly
round hole on the Clutch
Protrusion on the LD roller shaft
Figure 4-26. Assembling the Clutch
Change lever
procedure (1)
Revision A
83