Aligning The Corner Knife Station As To The Seams - Duerkopp Adler 745-34 Service Instructions Manual
Sewing unit for runstitching of piped flap and welt pocket openings and pocket corners working methods: a, b, d, f
Hide thumbs
Also See for 745-34:
- Operating instructions and replacement parts manual (92 pages) ,
- Installation instructions manual (24 pages) ,
- Spare parts (167 pages)
Table of Contents
Advertisement
5.3
Aligning the corner knife station as to the seams
70
Caution: Danger of injury !
Switch off the main switch.
Adjust the corner knife station only with the sewing unit switched off.
Standard checking
The corner incisions must be symmetrical to the seams.
–
Adjust the maximum sewing length at the control.
–
Iron a piece of interfacing on a workpiece.
By this the corner incisions become better visible.
–
Sew a test seam.
–
Check seam and cutting pattern.
Correction of the corner incision at the seam end
–
Swing the corner knife station 1 out completely.
1
Advertisement
Table of Contents
