Changing The Knife Stroke - Duerkopp Adler 550-12-23 Service Instructions Manual

2.18 Setting of the Edge Cutter (models 550-12-24; -26 only)

2.18.1 Changing the Knife Stroke

6
5 4 3
2 1
At the factory the knife stroke is set at 8 mm.
It can be changed to 6 mm.
This makes the machine quieter.
Caution Risk of Injury!
Before converting turn the main switch off.
–
Take the wick 6 out of the mounting 1.
–
Loosen screw 4.
–
Pull out bolt 2 with the wick and insert into the hole 3.
–
Tighten screw 4 again.
–
Pull wick 6 through the hole 5 again and place in the mounting 1.
37