Distance Between The Feeding Clamps And The Sole Of The Folder - Duerkopp Adler 745-34 Service Instructions Manual

4.4

Distance between the feeding clamps and the sole of the folder

2
64
1
Standard checking
Between the outer edges 1 of the folder sole and the inner edges 2 of
the feeding clamps there must be a certain distance. When processing
medium-weight clothing fabrics the distance should amount to approx.
1.0 to 1.5 mm.
The distance is required to guarantee equal piping strips on both sides
and an unhindered feed of the workpiece.
Caution: Danger of injury !
Check and adjust the feeding clamps with utmost caution when the
sewing unit is switched on.
–
Uncouple the pneumatic coupling for the locking sheets.
–
Switch into the pocket programs with function key F1.
–
Select the program for quick clamp adjustment with the cursor
keys "ï" or "ð".
Attention: Danger of breakage !
Select the corresponding clamp position according to the folder.
–
Select the corresponding symbol.
–
Press key OK.
The clamp position is taken over.
–
Press key RST.
The clamp position is taken over.
–
Select key F2 (pocket sequence).
–
Start the step-by-step mode.
4 3