Position Of The Assembly Strip On The Rest Table - Duerkopp Adler 745-34 Service Instructions Manual
Sewing unit for runstitching of piped flap and welt pocket openings and pocket corners working methods: a, b, d, f
Hide thumbs
Also See for 745-34:
- Operating instructions and replacement parts manual (92 pages) ,
- Installation instructions manual (24 pages) ,
- Spare parts (167 pages)
Table of Contents
Advertisement
15.6.2
Position of the assembly strip on the rest table
4
3
140
2
1
Caution: Danger of injury !
Switch off the main switch.
Adjust the position of the assembly strip only with the main switch
turned off.
Standard
The position of the assembly strip 3 has to be adjusted in such a
way that the gripping needle rows stick into the center of the sponge
rubber 2. Make sure that the pocket bag is not clamped by the loading
angle 4.
Correction
–
Loosen counternut 5.
–
Turn the piston rod 6 correspondingly.
–
Tighten counternut 5.
Correction of the table
–
Slightly loosen the counternuts 1.
–
Adjust the table.
–
Tighten the counternuts 1.
–
If necessary, bring the table in parallel position.
9
6
5
Advertisement
Table of Contents
