Clearance Of The Transport Foot Bar To The Material Presser Bar - Duerkopp Adler 550-12-23 Service Instructions Manual

2.3.3

Clearance of the Transport Foot Bar to the Material Presser Bar

11
12
8
The clearance between the transport foot bar and the material presser
bar should be 11 mm with the machine arrested in position B.
Caution Risk of Injury!
Before adjusting turn the main switch off.
–
Arrest the handwheel in position B.
–
Pull out plugs 9 and loosen the screws lying behind them.
–
With the eccentric 8 set the clearance appropriately.
9