Clearance Of The Transport Foot Bar To The Material Pressing Bar - Duerkopp Adler 195 Service Manual

2.3.3 Clearance from the Transport Foot Bar to the Material Pressing Bar
11
12
8
The clearance between the transport foot and material pressing bars
should be 11mm with the machine arrested in position B.
Caution Risk of Injury!
Turn off main switch before adjusting.
–
Arrest the handwheel in position B.
–
Remove the plug 9 and loosen the screws lying behind it.
–
Adjust the clearance accordingly with eccentric 8.
9