Figure 24. Bi-Directional Tandem Gate System (Swing Gate, If Used, Opens In) - Chamberlain SL 1000-B3 Owner's Manual

NOTE: If Radio is used, only one receiver/transmitter is required for both directions.
Rev E
Additional
Master Wiring
(if needed):
Fire
Manual Inputs
Interrupt Bar
Photo-Sensors
MagLock
Warning Relay
Tel. Line
Gate
Operator
Master
Additional
Master/ Slave Wiring
(if needed):
Slave
Manual Inputs
Cable
Interrupt Bar
Photo-Sensors
MagLock
Warning Relay
Gate
Operator
Slave
Figure 24. Bi-Directional Tandem Gate System
(Swing gate, if used, opens in).
Can use Radio or Cycle if
Exit Loop is not used.
Directional Exit Loop
Inside Interrupt Loop
Shadow Loop
(swing gates only)
Slide, Barrier or Swing Gate
Outside Interrupt Loop
Inside Interrupt Loop
Slide or Barrier Gate
Outside Interrupt Loop
Directional Exit Loop
Can use Radio or Cycle if
Exit Loop is not used.
Doc 01-20201
Swing gate open
direction and its
maximum arc.
1398F20
26 of 33