Figure 19. Bi-Directional Trap Gate System (Swing Gate Opens Out) - Chamberlain SL 1000-B3 Owner's Manual

Master/
Slave
Cable
NOTE: If Radio will be used in both gates, each gate will require a separate receiver/transmitter with a
separate entry code.
Rev E
Can use Radio or Cycle if
Additional
Exit Loop is not used.
Master Wiring
(if needed):
Directional Exit Loop
Fire
Manual Inputs
Interrupt Bar
Outside Interrupt Loop
Photo-Sensors
MagLock
Tel. Line
Slide, Barrier or Swing Gate
Gate
Operator
Master
Inside Interrupt Loop
Additional
Slave Wiring
(if needed):
Interrupt Bar
Photo-Sensors
MagLock
Gate
Operator
Slave
Inside Interrupt Loop
Slide or Barrier Gate
Outside Interrupt Loop
Directional Exit Loop
Can use Radio or Cycle if
Exit Loop is not used.
Figure 19. Bi-Directional Trap Gate System
(Swing gate opens out).
Doc 01-20201
Shadow Loop
(swing gates only)
Swing gate open
direction and its
maximum arc.
1398F15
21 of 33