Figure 14. Bi-Part, Uni-Directional Gate System (Swing Gate Opens Out); Figure 15. Bi-Part, Bi-Directional Gate System - Chamberlain SL 1000-B3 Owner's Manual

Additional
Master Wiring
(if needed):
Fire
Manual Inputs
Interrupt Bar
Photo-Sensors
MagLock
Warning Relay
Tel. Line
Gate
Operator
Master
Fence
If Radio is used, gate system becomes bi-directional, compromising safety and security.
Additional
Master Wiring
(if needed):
Fire
Manual Inputs
Interrupt Bar
Photo-Sensors
MagLock
Warning Relay
Tel. Line
Gate
Operator
Master
Fence
NOTE: If Radio is used, only one receiver/transmitter is required for both directions.
Rev E
Can use Radio or Cycle if
Exit Loop is not used.
Outside Interrupt Loop
Swing Gate
Master/Slave Cable
Shadow Loop
Inside Interrupt Loop
Figure 14. Bi-Part, Uni-Directional Gate System
(Swing gate opens out).
* WARNING
Can use Radio or Cycle if
Exit Loop is not used.
Directional Exit Loop
Inside Interrupt Loop
Shadow Loop
(swing gates only)
Master/Slave Cable
Slide, Barrier or Swing Gate
Outside Interrupt Loop
Directional Exit Loop
Can use Radio or Cycle if
Exit Loop is not used.

Figure 15. Bi-Part, Bi-Directional Gate System.

Doc 01-20201
Exit Loop
Swing Gate
Slide, Barrier or Swing Gate
Gate
Operator
Slave
Fence
Swing gate open
direction and its
maximum arc.
1398F10
Swing gate open
direction and its
maximum arc.
Gate
Operator
Slave
Fence
1398F11
18 of 33