Table of Contents
Advertisement
Master/
Slave
Cable
NOTE: If Radio will be used in both gates, each gate will require a separate receiver/transmitter with a
separate entry code.
Rev E
Additional
Master Wiring
Can use Radio or Cycle if
(if needed):
Exit Loop is not used.
Fire
Manual Inputs
Directional Exit Loop
Interrupt Bar
Photo-Sensors
MagLock
Inside Interrupt Loop
Tel. Line
Shadow Loop
Gate
(swing gates only)
Operator
Master
Slide, Barrier or Swing Gate
Outside Interrupt Loop
Additional
Slave Wiring
(if needed):
Interrupt Bar
Photo-Sensors
MagLock
Gate
Operator
Slave
Inside Interrupt Loop
Slide or Barrier Gate
Outside Interrupt Loop
Directional Exit Loop
Can use Radio or Cycle if
Exit Loop is not used.
Figure 18. Bi-Directional Trap Gate System
(Swing Gate, if used, opens in).
Doc 01-20201
Swing gate open
direction and its
maximum arc.
1398F14
20 of 33
Advertisement
Table of Contents
