8.
Convert automatic bartacker 510-213 to thick fabrics
8.1 General notes
2
1
Ex works the automatic bartacker 510-213 is equipped for the
processing of normal fabrics.
In case thicker fabrics are to be sewn on the automate the following
alterations have to be made:
·
The stop position of the automate has to be altered.
Ex works the positioning of the automate is done in the position
"Thread lever 3 in the top dead centre" (needle bar stands a little
deeper).
When converting to thicker fabrics the positioning is done in the
position
"Thread lever 15° before the top dead centre" (needle bar stands
higher).
·
The standard long thread wiper 1 has to be exchanged for a shorter
one.
3
2
2
19