3.5 Mount the reference value transmitter and the potential compensation
8
6
5
4
–
Screw the reference value transmitter 5 on the stand strut with
fixing link 1.
–
Hook the ball mugs of the pedal bars 6 in at the pedal and at the
reference value transmitter 5.
–
Screw the potential compensation cable 2 on the fixing link 1.
–
Screw the potential compensation cable 2 of the reference value
transmitter and the potential compensation cable 4 of the
sewing automate tight on the control box by means of screw 3.
1
2
3