Canopy Installation; Fan Preparation - Casablanca Stealth dc C45GxxxB Owner's Manual

Canopy
Step 1. Attach the canopy to the ceiling plate with
three of the 8-32 x 2 / " long canopy screws and
1
2
lock washers provided with your Casablanca fan.
Tighten using the provided screwdriver until snug
against the ceiling.
NOTE: On sloped ceilings, align the canopy
opening with the top or peak of the room.
Perma•Lock™ Downrod
Prepare for fan installation as follows:
Remove the paper shield from the motor as shown
in Figure #1.
Step 1. Loosen the set screw making sure that
end of the Set Screw can not be seen within the
motor coupling as shown in (Figure #2). If so, you
will need to unscrew the Set Screw so that the tip
of the Set Screw does not remain in the path of the
downrod
CANOPY HARDWARE
Canopy
Canopy Screws and (4) Lock
Hatch

CANOPY INSTALLATION

HANGING HARDWARE
and Ball Assembly

FAN PREPARATION

s
teaLth
Washers
Allen Wrench
PAPER MOTOR
SHIELD
Set Screw
®
dc
Phillips
Screwdriver
Canopy
Canopy
Screw
Lock
Washer
FIGURE 1.
FIGURE 2.
9