Casablanca 19th Century Instructions Manual page 9

BLADE
SCREW
Step 13. Attach the blades to the blade holders by aligning
the screw holes of the holder with the holes of the blade.
Attach the blade holder using the four blade screws and
blade washers provided for each blade.
Using the screwdriver, tighten securely by hand only.
Step 14. Remove the blade holder screw from the fan.
Slide the blade assembly into the cross bar, assuring that
the alignment holes line up.
Reinstall the blade holder screw, making sure that the blade
assembly is secure and does not rotate when turned.
Using a wrench or pliers, tighten securely by hand only.
ALIGNMENT
PIN
BLADE HOLDER
SCREW
BLADE HARDWARE
BLADE
WASHER
ATTACH BLADE HOLDERS
INSTALL BLADE ASSEMBLY
BLADE
ASSEMBLY
19 Century
th
BLADE
HOLDER
ALIGNMENT
HOLES
™
BLADE
BLADE
SCREW
BLADE
WASHER
BLADE HOLD-
ER SCREW
9