Casablanca 19th Century Instructions Manual page 8

DISASSEMBLE CANOPY AND MOTOR COVERS
Step 10. Remove the screws from the canopy cover and
the motor cover and set aside for later use.
Step 11. Take the two pieces of the
canopy cover and assemble them around
the downrod as shown. Using the four
screws removed in Step 10, assemble the
canopy cover.
Slide the canopy cover to the ceiling and
secure to the downrod using the two
provided screws. Tighten by hand only.
CAUTION: The canopy cover can NOT be used
on sloped ceilings.
Step 12. Take the two pieces of the
motor cover and assemble them around
the downrod as shown. Using the two
screws removed in Step 10, assemble the
motor cover.
Slide the motor cover down onto the top
of the fan and secure to the downrod
using the two provided screws.
Using the screwdriver, tighten securely
by hand only.
8
INSTALL CANOPY COVER
CANOPY
COVER
SCREWS FROM
STEP 10
INSTALL MOTOR COVER
CANOPY
COVER
PROVIDED
SCREWS
SCREWS FROM
STEP 10
PROVIDED
SCREWS
MOTOR
COVER