Casablanca 19th Century Instructions Manual page 7

Step 5. To hang the fan body in the canopy, hold the fan
body firmly and insert the nylon ball into the canopy opening.
Rotate fan body until slot on nylon ball fits into pin opposite
canopy opening.
NOTE: The fan weight is 35 pounds.
CANOPY ELECTRICAL CONNECTIONS
Step 6. Connect the fan wires to the outlet box
wiring by placing the bare ends of the wires
together and then securing with a wire nut.
Connect in this order:
• GREEN leads from mounting plate and fan to
GROUND conductor of power source. Secure
with wire nut.
• WHITE wire from fan to white NEUTRAL wire
in ceiling fixture outlet box.
Secure with wire nut.
• BLACK wire from fan to black POWER wire
in ceiling fixture outlet box.
Secure with wire nut.
Inspect each wire nut and ensure that no bare
wire is visible; pull on each wire to test the
connection is mechanically sound.
Step 7. Tuck the wires into the canopy
with the wire nuts pointed upwards, so
that the WHITE and BLACK wires are on
opposite sides of the canopy and all wires
are clear of the canopy opening.
Step 8. Install canopy hatch with the
last canopy screw and lock washer. To
do this, tilt the fan body away from the
hatch opening.
Tighten the screws firmly by hand only,
Step 9. Straighten the fan, then check
to ensure that there is no movement
between the canopy and ceiling or Hang-
Tru ball and top support shaft.
HANGING THE FAN
BALL
CANOPY HATCH INSTALLATION
Note: Write down the
Serial Number and the
model number for future
reference.
19 Century
th
SLOT
2 BLACK WIRES
2 WHITE WIRES
3 GREEN WIRES
CANOPY
HATCH
LOCK
WASHER
CANOPY
SCREW
™
CANOPY
PIN
TILT THE FAN
TO INSTALL
LAST CANOPY
SCREW
7