Removal And Replacement Of Components - HP Xw8200 - Workstation - 1 GB RAM Technical Reference Manual

System Board Architecture
The following image shows the HP Workstation xw8200 block diagram.

Removal and Replacement of Components

This section discusses the procedures necessary to remove and install various hardware components
on your workstation. Review the safety and precautions and the
well as the Safety and Regulatory Guide, before servicing or upgrading your system.
1 Read all safety information and precautions.
2 Locate and clear a suitable work area.
3 Shut down the system and remove power from the unit.
4 Gather your tools.
5 Service your unit.
6 Restore power to your unit.
68 REMOVAL AND REPLACEMENT PROCEDURES
"Service Considerations" on page 62, as