HP Xw8200 - Workstation - 1 GB RAM Technical Reference Manual page 81

PCI Card Support
For added protection, some cards have PCI holders installed to prevent movement during shipping.
To remove the card support:
1 Disconnect power from the system
workstation on its side with the system board facing up.
2 For short or tall PCI cards, lift up on the holder arm
holder and rotate it out of the chassis.
2
1
(page 66), remove the access panel
1 with one hand and press in on the sides
2
REMOVAL AND REPLACEMENT OF COMPONENTS 81
(page 71), and lay the
1
2 of the